Ground mounted luminaire with one sided 30º beam light output.
•Top flange is one piece screw less aluminium
•Inner casing S.S. 304 one piece for drive over up to 2 ton @ 10km/hr.
•Optional two cable glands with loop in/out connectors
•Lamp holder carrier in extruded aluminium for better heat sink of LED
•Double powder coated with high U.V. resistance
•Double gasket design for moisture protection,
•High temperature silicone cable.
•Strain relief cable clamp
•Wire for mains up to 2cX1.5mm2
• Approved Reiz energy saving electronic LED safety driver (BIS no. R-91000078)
• REIZ LED driver THD <10% >PF -0.95 Ripple<10% surge >3kv
3000K
Pathfinder mini
01 The outer housing # 12 with 3 screw # 18 is to be calibrated and casted in while floor is made.
02 In case, the buried luminaire is installed outdoors, provide a bed of stones/gravel ~300mmdeep to
ensure water drainage,and prevent water logging.
03 Note that while installation the outer housing top & the ground level position should be in same
level.
04 Lead cable through the cable gland # 03 & Lead 2c cable of 1.5mm2 from transformer to luminaire
and
connect in to the IP- 68 connector as per color coding, red (+ ve) in 1 & blue (–ve) in 2.
05 Leave a suitable length of cable coiled in the outer housing # 12 for easy re-lamping.
06 Switch on mains & test the luminaire.
07 The installation is now complete.
| IP Protection Rating |
IP67 |
|---|---|
| CCT |
3000K |
Description
Additional information
| IP Protection Rating |
IP67 |
|---|---|
| CCT |
3000K |
Projects