Volcano Micro

01 Remove the fixture # 01 from outer housing # 02. By pulling.
02 The outer housing # 02 of spot burial light is calibrated and casted in while floor/ wall is made.
03 In case the buried luminaire is installed outdoors provide a bed of stones/gravel ~300mm deep to
ensure water drainage and prevent water logging.
04 The PVC hose must be installed in such away that the supply cable can be pushed through it.
05 Lead cable through the outer housing & Lead 2c cable of 1.5mm2 from
24V DC transformer to luminaire
06 Leave a suitable length of cable coiled in the outer housing # 02 for easy re-lamping.
07 Insert the luminaire into the outer housing # 02
08 Switch on mains & test the luminaire.
09 The installation is now complete.