Volcano Mini 12W 15W

01 Remove the fixture # 01 from outer housing # 02. By pulling.
02 The outer housing # 02 of spot burial light is calibrated and casted in while floor/ wall is made.
03 In case the buried luminaire is installed outdoors provide a bed of stones/gravel ~300mm deep to
ensure water drainage and prevent water logging.
04 The PVC hose must be installed in such away that the supply cable can be pushed through it.
05 Lead cable through the outer housing and PVC hose,#06 & Lead 2c cable of 1.5mm2 from
transformer to luminaire and connect in to the IP-68 connector # 05 as per attached installation guide.
06 Leave a suitable length of cable coiled in the outer housing # 02 for easy re-lamping.
07 Insert the luminaire into the outer housing, point the reiz logo towards the target area to be tilt.
08 Switch on mains & test the luminaire.
09 The installation is now complete